|Posted: Nov 07 2020 at 9:21pm | IP Logged
Thanks for the reply!
I figured out they sent me the wrong calipers.
I was about to tap the correct size thread in there when I thought to myself that I should double check it properly. The holes in the original calipers and the new ones are the exact same distance center to center, but it still seemed odd, so I put the pads in and put the caliper on the truck. The rotor bottomed out in the caliper before the holes lined up with the holes on the truck.
The one I got is for the '99/'00 model. Caliper body is the exact same, so the pads fit,
but the bracket is around 5mm taller on mine and the thread is M14x1.5
for mine vs M12x1.25 for the older one.
They had them listed wrong in the catalog, so I am returning the calipers and will ask for a different set. Just sucks I have to wait for them to come in again...
2001 Nissan Frontier XE 3.3L MT 4x4