Nissan Frontier Forums

Affiliate Site : Nissan Titan Forums
  Active TopicsActive Topics  Display List of Forum MembersMemberlist  Search The ForumSearch  HelpHelp  Photo GalleryPhoto Gallery
  RegisterRegister  LoginLogin

Sponsored Links

Problems / Technical
 Nissan Frontier Forums : Problems / Technical
Subject Topic: 2007 Nissan Frontier Shaft Noise/Vibratio Post ReplyPost New Topic
Author
Message << Prev Topic | Next Topic >>
eddiem98
Newbie
Newbie


Joined: Oct 18 2026
Online Status: Offline
Posts: 2

Member's Gallery:
View Gallery




Location:
U.S. - Hawaii
Posted: Oct 18 2026 at 7:00pm | IP Logged Quote eddiem98

Aloha

Im the owner of a 2007 Nissan Frontier Crew 2WD manual
trans.I've been chasing an issue with what I believe is
the drive shaft. The truck has new tires, new brakes and
rotors, new Ebrake shoes, new Struts and Shocks. My
clutch needed to be replaces and since the vibration was
already getting bad due to what we thought it was a
problem with the carrier bearing decided to replace the
clutch (Disk, Pressure plate and bearing) also replaced
the seal on the trans and since we were already there the
shaft was replaced. One may ask why didn't I just replace
the carrier bearing and the answer is because the OEM
shaft was missing a few weights due to corrosion in
Hawaii. So i replaced the drive shaft with a Chinese OEM
part.

The new shaft also vibrates and makes a similar noise
like the one when you have unbalanced tires I can feel
the shaft vibrating via the gear shifter and it is not
noticeble at low speeds (Below 40 MPH) once you are on
5th or 6th gear the noise and vibration start. We checked
the wheel bearings as well and they all seem to be okay.
This truck only has 60K miles and should not be having an
issue with the Drive Shaft but here I am stomped with 2
proffesional mechanics with over 50 years experience.

If anyone has had an issue similar to this one please
chime in.

Mahalo and Aloha from the Islands.

__________________
2007 Nissan Frontier Crew Cab 2WD 4.0L engine.
Back to Top View eddiem98's Profile Search for other posts by eddiem98
 
Rubble
Moderator Group
Moderator Group
Avatar

Joined: Jul 31 2014
Online Status: Offline
Posts: 388

Member's Gallery:
View Gallery


Location:
United States
Posted: Oct 18 2026 at 8:45pm | IP Logged Quote Rubble

eddiem98 wrote:
Aloha

Im the owner of a 2007 Nissan Frontier Crew 2WD manual
trans.I've been chasing an issue with what I believe is
the drive shaft. The truck has new tires, new brakes and
rotors, new Ebrake shoes, new Struts and Shocks. My
clutch needed to be replaces and since the vibration was
already getting bad due to what we thought it was a
problem with the carrier bearing decided to replace the
clutch (Disk, Pressure plate and bearing) also replaced
the seal on the trans and since we were already there the
shaft was replaced. One may ask why didn't I just replace
the carrier bearing and the answer is because the OEM
shaft was missing a few weights due to corrosion in
Hawaii. So i replaced the drive shaft with a Chinese OEM
part.

The new shaft also vibrates and makes a similar noise
like the one when you have unbalanced tires I can feel
the shaft vibrating via the gear shifter and it is not
noticeble at low speeds (Below 40 MPH) once you are on
5th or 6th gear the noise and vibration start. We checked
the wheel bearings as well and they all seem to be okay.
This truck only has 60K miles and should not be having an
issue with the Drive Shaft but here I am stomped with 2
proffesional mechanics with over 50 years experience.

If anyone has had an issue similar to this one please
chime in.

Mahalo and Aloha from the Islands.


How About The Universal Joints?

You would need to consult the Nissan manager or His Best
Master Tech to see if the New Drive Shaft Needs to be
Balanced.

__________________
Barney ~ NOT A PROFESSIONAL MECHANIC ~ ALWAYS GO BY THE GENUINE NISSAN SERVICE MANUAL ~ 2013 SV V6 Frontier KC/AT/2WD Bought New ~ '93 I4 Hardbody KC/AT/2WD Bought New, Owned 20 yrs. Sold.
Back to Top View Rubble's Profile Search for other posts by Rubble
 
eddiem98
Newbie
Newbie


Joined: Oct 18 2026
Online Status: Offline
Posts: 2

Member's Gallery:
View Gallery


Location:
U.S. - Hawaii
Posted: Oct 18 2026 at 9:58pm | IP Logged Quote eddiem98

Mahalo for the response, the U Joints and Drive Shaft are
new and the DS is supposed to be balanced. I even asked for
the specs for it, supposedly the balancing is within specs.
It is absolutely possible that the Chinese drive shaft is
not balanced correctly which will explain the issue.

Losing my mind over this one for sure.

__________________
2007 Nissan Frontier Crew Cab 2WD 4.0L engine.
Back to Top View eddiem98's Profile Search for other posts by eddiem98
 

If you wish to post a reply to this topic you must first login
If you are not already registered you must first register

  Post ReplyPost New Topic
Printable version Printable version

Forum Jump
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Sponsors

Powered by Web Wiz Forums version 7.92
Copyright ©2001-2004 Web Wiz Guide
A Vebro Solutions Venture
Hosted by Vebro Hosts
Need a vacation? Find our more about a Hawaii Vacation or get Hawaii insider tips!