Posted: Nov 13 2007 at 8:03pm | IP Logged

uppers are not a problem they bolt on the lowers are a challenge you got 2 options some people replace the whole arm about 150.00  a side or you can get just the ball joint from Napa its about 70.00 for each ball joint but doing this is a little cheaper but the process to do it if your not cafull will trash the controll arm then you will need to buy a new one. I went the Ball joint route was very time consuming.

If you go over to www.nissanoffroad.net do a search I think there is a write up on how to do it also check www.xterraownersclub.com